FDGSi T-ZA laboratory gas generators for mass spectrometery lc/ms, gc/ms, ms/ms - from krss
 
 
 

T-ZA

The Zero Air generators produce dry and hydrocarbon-free air, using air from oil-free compressors, thus avoiding the need to use traditional bottles that are often complex to change. Designed with safety and convenience in mind, this system will eliminating the need for inconvenient high pressure gas cylinders. This complete turnkey system is engineered with the highest quality components, is easy to install and requires only minimal annual maintenance. The ergonomic, compact and silent design makes the Zero Air series the ideal solution for the following analytical applications.
  • Advantages
  • Characteristics
  • Specifications
  • Demo
  • Quote

Advantages

Better detector performance
The reduction of hydrocarbons, including methane to < 0.05 ppm decreases
the background noise level and gives the baseline much better stability,
considerably increasing detector sensitivity and ensuring precise analytical
results.

Increased laboratory efficiency

A constant, uninterrupted gas supply of guaranteed purity eliminates interruptions of analyses to change cylinders and reduces the amount of instrument re-calibrations required.

Save money

The unit only requires connection to a suitable socket and to external source of compressed air. The investment can be paid back in less than one year.

Improved safety
Zero air produced at low pressure and ambient temperature removes the need for high pressure cylinders.

Simple installation
Gas generators can be installed in the laboratory, on or under a bench, eliminating the need for long gas lines from cylinders secured elsewhere.

Characteristics

  • Various flow rate : 1.8, 5 L/min
  • Purity : HC < 0.05 ppm
  • CO < 0.05 ppm
  • Pressure : up to 6 bar (87 psi)
  • Unique Tower design : bench space saving
  • External clean and dry air compressor required

Specifications

ModelsT.ZA.1800T.ZA.5000
General information Zero Air
Zero air flow rate1.8 L/min5 L/min
CH4, CO, NOx level outCH4 < 0.05 ppm
Zero air outlet pressure6 bar (87 psi)
Particle filtration level< 0.1 micron
Temperature rangeFrom 5 – 35°C (4 – 95°F) and humidity 80% to 25°C (77°F)
Dimensions (W x H x D)14 x 49 x 63 cm (5.5" x 19" x 25")
Inlet/outlet connection1/8″ G F
Weight (kg/lbs)8 / 17.6
Fuse2 A (5 x 20 mm)
Power supply240 W (280 V ac)
Electrical supply90 – 240 V ac / 50 – 60 Hz
General information for inlet air/td>
Water dewpoint at the inlet< -20°C (-4°F)
HCs concentration Max.
at the inlet
100 ppm
Maximum inlet air temperature40°C (104°F)
Inlet air pressure (min/max)4.5 – 10 bar (64 – 145 psi)
Air inlet quality requiredHCs < 100 ppm, dewpoint H2O < -20°C (-4°F)
Certification
CE, CSAX

Demo

 

Quote

 
KRSS Left Strip