Updated cookies policy - you'll see this message only once.
KRSS Ltd uses cookies on this website. They help us to know a little bit about you and how you use our website, which improves the browsing experience and marketing - both for you and for others. They are stored locally on your computer or mobile device. To accept cookies continue browsing as normal. Or go to the cookie policy for more information.
F-DGSi
Laboratory gas generators

F-DGSi are dedicated to providing the best after sales service and support team in gas generators for the analytical instrument market.

Keeping the gas flowing is critical to our customers and therefore to FDGSi and its partners, therefore FDGSi always maintain an exhaustive service inventory of both spare parts and fully functional generators, aimed at providing fast deliveries and state of the art technical and application support to the end user. Their facility perfectly matching and fulfilling their Number One objective of a continuous enhancement of the services provided to the customers as well as helping them to honour their aphorism: of always being ONE STEP AHEAD of the competition.

Customers choose F-DGSi as their partner for analytical gas systems because, simply, they know labs. Through years of experience F-DGSi has gained a wealth of knowledge and understanding of laboratory applications. Knowledge that their highly trained team and chosen partners use to given you the end user expert technical advice and offer you the best solution to your needs.

RACK-FID-H2

More Information
FDGSi RACK-FID-H2 GC-FID, GC-FPD, GC-NPD, Mud logging

FDGSi RACK-FID-H2 GC-FID, GC-FPD, GC-NPD, Mud logging

This unit can provide both hydrogen gas and zero grade air to FID detectors on Gas Chromatographs.

Hydrogen gas is produced from deionised water using a Proton Exchange Membrane Technology. Zero air is produced by purifying compressed air sourced from the air network to a total hydrocarbon concentration of < 0.05 ppm (measured as methane). The RACK.FID.H2 generator combines the hydrogen serie ND-H2 and Zero air serie ZA generators in one unit.

The touch screen LCD interface provides simple and user friendly management of all functions on the unit.

i-FLOW-H2 STATION

More Information
FDGSi i-FLOW-H2 STATION GC-FID, GC-FPD, GC-NPD, GC-TCD, GC-Carrier gas, GC-MS, GC-FAST, THA, Hydrogenation, ICP-MS, Fuel cell

FDGSi i-FLOW-H2 STATION GC-FID, GC-FPD, GC-NPD, GC-TCD, GC-Carrier gas, GC-MS, GC-FAST, THA, Hydrogenation, ICP-MS, Fuel cell

The F-DGSi Hydrogen gas station high flow serie i-FLOW-H2 STATION is able to generate up to 10 L/min Hydrogen with purity better than 99.9999% and  pressure up to 16 bar (232 psi).

The i-FLOW-H2 STATION 10L (3 modules of 3.3 L/min) includes the new long life multilayer electrolytic cell with polymeric membrane (PEM) using distilled water. The innovative gas drying system with automatic regeneration ensures the maximum grade of hydrogen purity, and is completely maintenance-free and allows continuous operation, 24 hours a day. The on-board processor constantly control the operating parameters to guarantee full safety. The touch-screen LCD interface provides simple and user-friendly management of all unit functions.

RACK-WM-H2-3300

More Information
FDGSi RACK-WM-H2-3300 GC-FID, GC-FPD, GC-NPD, GC-TCD, GC-Carrier gas, GC-MS, GC-FAST, THA, Hydrogenation, ICP-MS, Fuel cell

FDGSi RACK-WM-H2-3300 GC-FID, GC-FPD, GC-NPD, GC-TCD, GC-Carrier gas, GC-MS, GC-FAST, THA, Hydrogenation, ICP-MS, Fuel cell

The RACK-WM-H2-3300 series use:

– The latest polymer electrolyte membrane (PEM) technology to produce pure hydrogen.
– The exclusive double gas column dryer regeneration system to eliminate all down time for maintenance that is typical of other systems on the market, guaranteeing the best hydrogen purity at all times.

The touch screen LCD interface provides simple and user-friendly management of all functions on the unit.

RACK-H2

More Information
FDGSi RACK-H2 GC-FID, GC-FPD, GC-NPD, GC-TCD, GC-Carrier gas, Hydrogenation, ICP-MS, Fuel cell, THA

FDGSi RACK-H2 GC-FID, GC-FPD, GC-NPD, GC-TCD, GC-Carrier gas, Hydrogenation, ICP-MS, Fuel cell, THA

The RACK-H2 series use the latest polymer electrolyte membrane (PEM) technology to produce pure hydrogen.

The drying system is different following the model:
RACK-ND-H2 Series : use the dessicant cartridge
RACK-WM-H2 Series : use a double column dryer with automatic regeneration

PAR-H2

More Information
FDGSi PAR-H2 GC-MS, GC-FAST, GC-Carrier gas, GC-FID, GC-FPD, GC-NPD, GC-TCD, Hydrogenation, ICP-MS, Fuel cell, THA

FDGSi PAR-H2 GC-MS, GC-FAST, GC-Carrier gas, GC-FID, GC-FPD, GC-NPD, GC-TCD, Hydrogenation, ICP-MS, Fuel cell, THA

The PAR-H2 series use:

– The latest polymer electrolyte membrane (PEM) technology to produce pure hydrogen.
– A single column dryer with programmable automatic regeneration via an integrated clever calendar.

The exclusive, electronically-controlled gas/liquid separator, automatic checking for internal leaks whenever starting the units and constant control of operating parameters, guarantee maximum safety.

The touch screen LCD interface provides simple and user-friendly management of all functions on the unit


LC-H2

More Information
FDGSi LC-H2 GC-FID, GC-FPD, GC-NPD, GC-TCD, Hydrogenation, ICP-MS, Fuel cell, THA

FDGSi LC-H2 GC-FID, GC-FPD, GC-NPD, GC-TCD, Hydrogenation, ICP-MS, Fuel cell, THA

The LC-H2 series use :

– The latest polymer electrolyte membrane (PEM) Technology to produce pure hydrogen.
– A desiccant cartridge which can be refill or replaced by a new one.

The exclusive, electronically-controlled gas/liquid separator, automatic checking for internal leaks whenever starting the units and constant control of operating parameters, guarantee maximum safety.

The touch screen LCD interface provides simple and user-friendly management of all functions on the unit.

N2-HP

More Information
FDGSi N2-HP GC-NPD, GC-MS, GC-ECD, GC-AED, GC-FPD, TOC, Atomic absorption, Sample evaporation, TGA

FDGSi N2-HP GC-NPD, GC-MS, GC-ECD, GC-AED, GC-FPD, TOC, Atomic absorption, Sample evaporation, TGA

The F-DGSi High Purity (HP) Nitrogen Generators are engineered to transform standard compressed air in to a safe regulated supply of 99.9995% pure nitrogen.

SD-H2

More Information
FDGSi SD-H2 GC-FID, GC-FPD, GC-NPD, GC-TCD, THA, Hydrogenation, Fuel cell

FDGSi SD-H2 GC-FID, GC-FPD, GC-NPD, GC-TCD, THA, Hydrogenation, Fuel cell

The SD-H2 series use :

– The latest polymer electrolyte membrane (PEM) technology to produce pure hydrogen
– A static dryer, maintenance free to dry the H2 gas to increase the purity

The exclusive, electronically-controlled gas/liquid separator, automatic checking for internal leaks whenever starting the unit, and constant control of operating parameters, guarantee maximum safety.

The touch-screen LCD interface provides simple and user-friendly management of all functions on the unit.

RACK-ZN2-HP

More Information
FDGSi RACK-ZN2-HP GC-NPD, GC-TCD, GC-AED, GC-ECD, GC-MS, Atomic absorption

FDGSi RACK-ZN2-HP GC-NPD, GC-TCD, GC-AED, GC-ECD, GC-MS, Atomic absorption

The F-DGSi High Purity (HP) Nitrogen Generators are engineered to transform standard compressed air in to a safe regulated supply of 99.9995% pure nitrogen, O2 and moisture free and a catalyst to remove hydrocarbons (CH4) < 0.05 ppm from Nitrogen.

Mini Z-Alize

More Information
FDGSi Mini Z-Alize GC-NPD, GC-ECD, GC-AED, GC-FPD, GC-Carrier gas, GC-MS

FDGSi Mini Z-Alize GC-NPD, GC-ECD, GC-AED, GC-FPD, GC-Carrier gas, GC-MS

The F-DGSi’s range of laboratory Nitrogen Gas Generators are some of best designed PSA Nitrogen Gas Generators available.
Utilizing the reliable and efficient PSA technique of separating Nitrogen and Oxygen is used to produce high quality Nitrogen Gas at various flows and purities (see performance data).

The Generator is controlled using the latest in HMI touch screen technology to display the process in real time, inlet/outlet pressures and oxygen level (optional).


ZA

More Information
FDGSi ZA GC-FID, GC-FPD, GC-NPD, THA, CO2 analyzer, Gas sensing

FDGSi ZA GC-FID, GC-FPD, GC-NPD, THA, CO2 analyzer, Gas sensing

The Zero Air generators produce dry and hydrocarbon-free air, using air from oil-free compressors, thus avoiding the need to use traditional bottles that are often complex to change. Designed with safety and convenience in mind, this system will eliminating the need for inconvenient high pressure gas cylinders.

This complete turnkey system is engineered with the highest quality components, is easy to install and requires only minimal annual maintenance. The ergonomic, compact and silent design makes the Zero Air series the ideal solution for the following analytical applications.

LC-H2/ZA

More Information
FDGSi LC-H2/ZA GC-FID, GC-FPD, GC-NPD

FDGSi LC-H2/ZA GC-FID, GC-FPD, GC-NPD

This unit can provide both hydrogen gas and zero grade air to FID detectors on Gas Chromatographs.

Hydrogen gas is produced from deionised water using a Proton Exchange Membrane Technology. Zero air is produced by purifying compressed air sourced from the air network to a total hydrocarbon concentration of < 0.05 ppm (measured as methane).

The H2/AIR FID Station combine the hydrogen serie FID-LC-H2 and Zero air serie ZA generators in one unit.

MAESTRO-DF/1-QSIGHT

More Information
FDGSi MAESTRO-DF/1-QSIGHT LCMS

FDGSi MAESTRO-DF/1-QSIGHT LCMS

The dual flow generator has been specifically designed to meet the nitrogen and dry air needs to supply the Perkin Elmer QSIGHT LCMS Mass Spectrometer.

Nitrogen is produced by pressure swing adsorption (PSA) to remove oxygen, carbon dioxide and water from compressed air and purified air is produced by using a membrane air dryer.

The generator is controlled using the latest in HMI touch screen technology to display the process in real time, inlet / outlet pressure, N2/Air Flow and status of the system.

WM-H2 Series

More Information
FDGSi WM-H2 Series GC-MS, GC-FAST, GC-Carrier gas, GC-FID, GC-FPD, GC-NPD, GC-TCD, Hydrogenation, ICP-MS, Fuel cell, THA

FDGSi WM-H2 Series GC-MS, GC-FAST, GC-Carrier gas, GC-FID, GC-FPD, GC-NPD, GC-TCD, Hydrogenation, ICP-MS, Fuel cell, THA

 The WM-H2 series use:

– The latest polymer electrolyte membrane (PEM) technology to produce pure hydrogen.
– The exclusive double gas column dryer regeneration system to eliminate all down time for maintenance that is typical of other systems on the market, guaranteeing the best hydrogen purity at all times.

The exclusive, electronically-controlled gas/liquid separator, automatic checking for internal leaks whenever starting the units and constant control of operating parameters, guarantee maximum safety.

The touch screen LCD interface provides simple and user-friendly management of all functions on the unit.

ND-H2

More Information
FDGSi ND-H2 GC-FID, GC-FPD, GC-NPD, GC-TCD, Hydrogenation, ICP-MS, Fuel cell, THA

FDGSi ND-H2 GC-FID, GC-FPD, GC-NPD, GC-TCD, Hydrogenation, ICP-MS, Fuel cell, THA

 The ND-H2 series use :

– The latest polymer electrolyte membrane (PEM) technology to produce pure hydrogen
– A desiccant cartridge which allow to dry the H2 gas and increase the purity

The exclusive, electronically-controlled gas/liquid separator, automatic checking for internal leaks whenever starting the units and constant control of operating parameters, guarantee maximum safety.

The touch screen LCD interface provides simple and user-friendly management of all functions on the unit.

LC-H2 Series

More Information
FDGSi LC-H2 Series GC-FID, GC-FPD, GC-NPD, GC-TCD, Hydrogenation, ICP-MS, Fuel cell, THA

FDGSi LC-H2 Series GC-FID, GC-FPD, GC-NPD, GC-TCD, Hydrogenation, ICP-MS, Fuel cell, THA

 The LC-H2 series use :

– The latest polymer electrolyte membrane (PEM) Technology to produce pure hydrogen.
– A desiccant cartridge which can be refill or replaced by a new one.

The exclusive, electronically-controlled gas/liquid separator, automatic checking for internal leaks whenever starting the units and constant control of operating parameters, guarantee maximum safety.

The touch screen LCD interface provides simple and user-friendly management of all functions on the unit.

EURUS - LCMS

More Information
FDGSi EURUS - LCMS LCMS, Sample evaporation

FDGSi EURUS - LCMS LCMS, Sample evaporation

The nitrogen generator has been specifically designed to meet the gas flow, purity and pressure requirements of LCMS instruments. It can be used also for solvent evaporation.

The Nitrogen generator uses pressure swing adsorption technology (PSA) combined with a pressure management in two steps to produce pure nitrogen gas with a high flow, pressure and purity.

Z-ALLIA

More Information
FDGSi Z-ALLIA GC-FID, GC-FPD, GC-NPD, GC-TCD, GC-Carrier gas

FDGSi Z-ALLIA GC-FID, GC-FPD, GC-NPD, GC-TCD, GC-Carrier gas

The combined ZN2/Air generator eliminates the need for costly, inconvenient high pressure cylinders in the laboratory. Including an integral oil free air compressor in option, the combined nitrogen/air generators deliver a continuous stream of pure nitrogen gas > 99,9995% and grade purified air with HCs content < 0.1 ppm, ideal for applications, such as, GC carrier gas, make up and GC-FID.

Zero Nitrogen is produced by pressure swing adsorption (PSA) to remove oxygen, carbon dioxide and water from compressed air and a catalyst to remove hydrocarbons (CH4) < 0.05 ppm from Nitrogen.

The pure air is produced by using an activated alumina column.

The Generator is controlled using the latest in HMI touch screen technology to display the process in real time, inlet/outlet pressures.

Alize Series

More Information
FDGSi Alize Series GC-NPD, GC-ECD, GC-AED, GC-2D, GC-MS, GC-FPC, TOC, ELSD, Corona, ICP, DSC, TGA, RMN, DMA, TMA, TOD, Circular Dichroism, Sample evaporation, Glove box, Atomic absorption, TURBOVAP

FDGSi Alize Series GC-NPD, GC-ECD, GC-AED, GC-2D, GC-MS, GC-FPC, TOC, ELSD, Corona, ICP, DSC, TGA, RMN, DMA, TMA, TOD, Circular Dichroism, Sample evaporation, Glove box, Atomic absorption, TURBOVAP

The F-DGSi’s range of laboratory Nitrogen Gas Generators are some of best designed PSA Nitrogen Gas Generators available. Utilizing the reliable and efficient PSA technique of separating Nitrogen and Oxygen is used to produce high quality Nitrogen Gas at various flows and purities (see performance data).

The Generator is controlled using the latest in HMI touch screen technology to display the process in real time, inlet/outlet pressures and oxygen level (optional).

UZAG

More Information
FDGSi UZAG GC-FID, GC-FPD, GC-NPD, CO2 analyzer

FDGSi UZAG GC-FID, GC-FPD, GC-NPD, CO2 analyzer

F-DGS’s Ultra Zero Air Generators are some of the most efficient Hydrocarbon-free air purifier systems for laboratory use. Utilising the PSA technology to remove water vapour and the heated catalyst technology to remove THC including methane to less than 0.05 ppm. This Ultra Zero Air station DO NOT requires external compressed air supply.

The Generator is controlled using the latest in HMI touch screen technology to display the process in real time.

MAESTRO-DF LCMS

More Information
FDGSi MAESTRO-DF LCMS LCMS

FDGSi MAESTRO-DF LCMS LCMS

MAESTRO-DF  : The dual flow, specifically designed for the Agilent 6400 & 6500: to meet the drying, sheath, nebulisation and collision gas requirements. The generator provides two continuous streams of nitrogen from a single ‘plug & play’ unit.

Available with/or without built in air compressor.

CO2-AG

More Information
FDGSi CO2-AG GC-ATD, TOC

FDGSi CO2-AG GC-ATD, TOC

The F-DGSi’s CO2 free air generators are some of the smallest and most efficient CO2 purifier systems for laboratory use, utilising a CO2 removal air dryer to remove CO2 less than 1 ppm.

This CO2 free air station is controlled using the latest in HMI touch screen technology to display the process in real time.

AG

More Information
FDGSi AG GC-FID, GC-NPD, GC-FPD, THA, Atomic absorption

FDGSi AG GC-FID, GC-NPD, GC-FPD, THA, Atomic absorption

The Pure Air generator eliminates the need for costly, inconvenient high pressure cylinders in the laboratory.
Including an integral oil free air compressor, the Pure Air generator delivers a continuous stream of pure air gas with HCs content <0.01ppm, ideal for applications, such as, GC-FID.

Air is produced by pressure swing adsorption (PSA) using two activated alumina columns to remove water, hydrocarbon non CH4 and particles from compressed air.

The Generator is controlled using the latest in HMI touch screen technology to display the process in real time, inlet/outlet pressures.

PURAIR

More Information
FDGSi PURAIR LCMS

FDGSi PURAIR LCMS

The PURAIR-34/1 DF has been designed specifically for systems which require a source of Dry Air (Nebulizer/Heating Gas) and Air (Exhaust Gas), such as Shimadzu’s LCMS-8080.

Pure Air is produced by using a cyclonic water separator filter, submicronic coalescing filter and membrane air dryer, removing moisture and other gases, delivering dry, clean, phthalate free air.

The generator provide two continuous streams of Pure Air from a single ‘plug & play’ unit. The model is available with an integral oil free compressor, and is extremely quiet in operation.

The Generator is controlled using the latest in HMI touch screen technology to display the process in real time, inlet/outlet pressures.

ZN2-HP

More Information
FDGSi ZN2-HP GC-NPD, GC-ECD, GC-AED, GC-TCD, GC-FPD, GC-MS

FDGSi ZN2-HP GC-NPD, GC-ECD, GC-AED, GC-TCD, GC-FPD, GC-MS

The F-DGSi High Purity (HP) Nitrogen Generators are engineered to transform standard compressed air in to a safe regulated supply of 99.9995% pure nitrogen, O2 and moisture free and a catalyst to remove hydrocarbons (CH4) < 0.05 ppm from Nitrogen.

ALLIA

More Information
FDGSi ALLIA GC-FID, GC-Carrier gas, GC-FPD, GC-NPD, GC-TCD

FDGSi ALLIA GC-FID, GC-Carrier gas, GC-FPD, GC-NPD, GC-TCD

The combined N2/Air generator eliminates the need for costly, inconvenient high pressure cylinders in the laboratory. Including an integral oil free air compressor in option, the combined nitrogen/air generators deliver a continuous stream of pure nitrogen gas > 99.9995% and grade purified air with HCs content < 0.1 ppm, ideal for applications, such as, GC carrier gas, make up and GC-FID.

Nitrogen is produced by pressure swing adsorption (PSA) to remove oxygen, carbon dioxide and water from compressed air and purified air is produced by using an activated alumina column.

The Generator is controlled using the latest in HMI touch screen technology to display the process in real time, inlet/outlet pressures.

TOC

More Information
FDGSi TOC TOC, GC-FID, GC-FPD, GC-NPD, CO2 analyzer, THA, Electronic noise

FDGSi TOC TOC, GC-FID, GC-FPD, GC-NPD, CO2 analyzer, THA, Electronic noise

F-DGS’s TOC Air generators are some of the smallest and most efficient Hydrocarbon-free air and CO2 purifier systems for laboratory use. Utilising a heated catalyst technology which is combined with a CO2 removal air dryer to remove THC including methane to less than 0.05 ppm and CO2 less than 1 ppm.

This TOC air station is controlled using the latest in HMI touch screen technology to display the process in real time.

THYSTER-DF/MP-AES

More Information
FDGSi THYSTER-DF/MP-AES MP-AES

FDGSi THYSTER-DF/MP-AES MP-AES

The THYSTER-DF dual flow generator has been specifically designed to meet the nitrogen and dry air needs to supply a Microwave Plasma Atomic Emission Spectrometer (MP-AES) of the Agilent range.

Nitrogen is produced by pressure swing absorption (PSA) to remove oxygen, carbon dioxide and water from compressed air and purified air is produced by using an activated alumina column.

The generators provide two continuous streams of Nitrogen and Dry Air from a single ‘plug & play’ unit. The model is available with an integral oil free compressor, and is extremely quiet in operation

The Generator is controlled using the latest in HMI touch screen technology to display the process in real time, inlet/outlet pressures.

THYSTER-DF/PEGA

More Information
FDGSi THYSTER-DF/PEGA GC-4D

FDGSi THYSTER-DF/PEGA GC-4D

The THYSTER-DF/PEGA dual flow generator has been specifically designed to meet the nitrogen and pure air needs to supply a LECO PEGASUS 4D GC x GC-TOFMS

Nitrogen is produced by pressure swing absorption (PSA) to remove oxygen, carbon dioxide and water from compressed air and purified air is produced by using a cyclonic water separator filter and submicronic coalescing filter.

The generators provide two continuous streams of Nitrogen and Air from a single ‘plug & play’ unit. The model is available with an integral oil free compressor, and is extremely quiet in operation.

The Generator is controlled using the latest in HMI touch screen technology to display the process in real time, inlet/outlet pressures.

TORNADO

More Information
FDGSi TORNADO LCMS, Sample evaporation, RMN, ICP

FDGSi TORNADO LCMS, Sample evaporation, RMN, ICP

The nitrogen generators serie Tornado offer to you a unique, innovative solution to nitrogen gas supply. A reliable, secure source of nitrogen can be produced from your existing compressed air supply, eliminating the need for liquid nitrogen or high pressure gas cylinders. Conceived for a continuous operation, the Tornado nitrogen generator can produce flow rates from a few liters per minutes to over NM3/H at purities in oxygen content residual from 10 ppm to 5%. The generator is controlled using the latest in HMI touch screen technology to display the process, pressures, inlet air dewpoint and oxygen levels with continuous monitoring complete with alarms.

TORNADO LITE

More Information
FDGSi TORNADO LITE LCMS, Sample evaporation, NMR, Glove box, Circular Dichroism, ICP

FDGSi TORNADO LITE LCMS, Sample evaporation, NMR, Glove box, Circular Dichroism, ICP

The nitrogen generators serie Tornado Lite offer to you a unique, innovative solution to nitrogen gas supply. A reliable, secure source of nitrogen can be produced from your existing compressed air supply, eliminating the need for liquid nitrogen or high pressure gas cylinders.

Conceived for a continuous operation, the Tornado Lite nitrogen generator can produce flow rates from a few liters per minutes to over NL/min at purities in oxygen content residual from 10 ppm to 3%.

The generator is controlled using the latest in HMI touch screen technology to display the process, pressures, inlet air dewpoint and oxygen levels with continuous monitoring complete with alarms.

MAESTRO-8050/1

More Information
FDGSi MAESTRO-8050/1 LCMS

FDGSi MAESTRO-8050/1 LCMS

The MAESTRO-8050/1 is a dual flow generator, which has been specifically designed to meet the nitrogen and dry air needs to supply the Shimadzu LCMS 8045, 8050, 8060.

The generator is built with two internal air compressors as standard, and is extremely quiet in operation.
The configuration allows users to change the flow ratio of nitrogen and dry air from the touch screen display, such that the total flow is 25L/min, split between nitrogen and dry air.

The Generator is controlled using the latest in HMI touch screen technology to display the process in real time, inlet/outlet pressures.

EURUS HP-ASE

More Information
FDGSi EURUS HP-ASE ASE-Dionex

FDGSi EURUS HP-ASE ASE-Dionex

The nitrogen generator has been specifically designed to meet the gas flow, purity and pressure requirements of ASE extraction systems.

The Nitrogen generator use pressure swing adsorption technology (PSA) combined with a pressure management in two steps to produce pure nitrogen gas with a high flow, pressure and purity. The nitrogen generator, model Eurus High Pressure, the only one on the market working up to 11 bar (159 psi).

MAESTRO-DF/EVOQ-TQ

More Information
FDGSi MAESTRO-DF/EVOQ-TQ LCMS

FDGSi MAESTRO-DF/EVOQ-TQ LCMS

LC-MS analysers do not all share the same requirements in terms of flow rate, pressure and purity of the gases needed for their operation.

MAESTRO-DF/EVOQ-TQ : The dual flow generator has been specifically designed to meet the nitrogen and dry air needs to supply the Bruker EVOQ triple quadrupole Mass Spectrometer.

The Generator is controlled using the latest in HMI touch screen technology to display the process in real time, inlet/outlet pressures.

MAESTRO-LCMS

More Information
FDGSi MAESTRO-LCMS LCMS

FDGSi MAESTRO-LCMS LCMS

LC-MS analysers do not all share the same requirements in terms of flow rate, pressure and purity of the gases needed for their operation.

Available in 4 models with the option with/ or without / built in air compressor :
• MAESTRO-15 : max. output of 15 L/min of N2 gas
• MAESTRO-25 : max. output of 25 L/min of N2 gas
• MAESTRO-35 : max. output of 35 L/min of N2 gas
• MAESTRO-64 : max. output of 64 L/min of N2 gas

THYSTER

More Information
FDGSi THYSTER MP-AES

FDGSi THYSTER MP-AES

The THYSTER generator has been specifically designed to meet the nitrogen needs to supply a Microwave Plasma Atomic Emission Spectrometer (MP-AES) of the Agilent range for only sulfur component analysis. Nitrogen is produced by pressure swing absorption (PSA) to remove oxygen, carbon dioxide and water from compressed air. The model is available with an integral oil free compressor, and is extremely quiet in operation. The Generator is controlled using the latest in HMI touch screen technology to display the process in real time, inlet/outlet pressures.

ZEPHYR

More Information
FDGSi ZEPHYR ICP, Circular Dichroism, Sample evaporation, Atomic absorption, TURBOVAP, GC-Carrier gas

FDGSi ZEPHYR ICP, Circular Dichroism, Sample evaporation, Atomic absorption, TURBOVAP, GC-Carrier gas

F-DGSi’s range of laboratory Nitrogen Gas Generators are some of the best designed PSA Nitrogen Gas Generators available, to supply a continuous flow of Nitrogen Gas at a predetermined pressure and purity.

The generator includes internal storage and automatic shut-down on low/no demand of Nitrogen gas. The generator is controlled using the latest in HMI touch screen technology to display the process in real time.

RACK-N2-HP

More Information
FDGSi RACK-N2-HP GC-FPD, GC-NPD, GC-ECD, GC-AED, GC-MS, TOC, Sample evaporation, TGA, Atomic absorption, DSC

FDGSi RACK-N2-HP GC-FPD, GC-NPD, GC-ECD, GC-AED, GC-MS, TOC, Sample evaporation, TGA, Atomic absorption, DSC

The F-DGSi High Purity (HP) Nitrogen Generators are engineered to transform standard compressed air in to a safe regulated supply of 99.9995% pure nitrogen.

MINI ALIZE

More Information
FDGSi MINI ALIZE GC-NPD, GC-FPD, GC-ECD, GC-AED, GC-MS, TOC, Atomic absorption, Sample evaporation, TGA, DSC

FDGSi MINI ALIZE GC-NPD, GC-FPD, GC-ECD, GC-AED, GC-MS, TOC, Atomic absorption, Sample evaporation, TGA, DSC

The F-DGSi’s range of laboratory Nitrogen Gas Generators are some of best designed PSA Nitrogen Gas Generators available.

Utilizing the reliable and efficient PSA technique of separating Nitrogen and Oxygen is used to produce high quality Nitrogen Gas at various flows and purities (see performance data).

The Generator is controlled using the latest in HMI touch screen technology to display the process in real time, inlet/outlet pressures and oxygen level (optional).

FT-IR

More Information
FDGSi FT-IR FT-IR

FDGSi FT-IR FT-IR

The F-DGSi’s FT-IR Purge Gas generators is specifically designed for use with FT-IR spectrometers to provide a purified purge and air bearing gas supply from compressed air.

The unit provides instruments with CO2 free compressed air at less than -70°C (-94°F) dewpoint with no suspended impurities larger than 0.01 micron 24 hours/day, 7 days/week.

The generator is controlled using the latest in HMI touch screen technology to display the process in real time, inlet/outlet pressures.

MAESTRO-TF LCMS

More Information
FDGSi MAESTRO-TF LCMS LCMS

FDGSi MAESTRO-TF LCMS LCMS

LC-MS analysers do not all share the same requirements in terms of flow rate, pressure and purity of the gases needed for their operation.

Available in 2 models :
MAESTRO-TF / Maestro-TF-HF : The triple flow, specifically designed to supply Curtain, Source & Exhaust gases with dry air and nitrogen for ABI SCIEX LCMS instruments.

The generator is controlled using the latest in HMI touch screen technology to display the process in real time, inlet / outlet pressure, N2/Air Flow and status of the system.

MODULAR ALLIANCE

More Information
FDGSi MODULAR ALLIANCE GC-MS, GC-FAST, GC-Carrier gas, GC-FID, GC-FPD, GC-NPD, GC-TCD, Hydrogenation, ICP-MS, Fuel cell, THA

FDGSi MODULAR ALLIANCE GC-MS, GC-FAST, GC-Carrier gas, GC-FID, GC-FPD, GC-NPD, GC-TCD, Hydrogenation, ICP-MS, Fuel cell, THA

The modular System is the right solution for your GC detector and carrier gas supply, providing Hydrogen, Nitrogen, Zero Air, in a sleek and appealing design, increasing

• Productivity
• Safety
• Efficiency
• Consistency
• Convenience

Z-ALIZE

More Information
FDGSi Z-ALIZE GC-NPD, GC-ECD, GC-AED, GC-FPD, GC-MS, Atomic absorption

FDGSi Z-ALIZE GC-NPD, GC-ECD, GC-AED, GC-FPD, GC-MS, Atomic absorption

F-DGS’s range of laboratory Nitrogen Gas Generators are some of best designed PSA Nitrogen Gas Generators available.

Utilizing the reliable and efficient PSA technique of separating Nitrogen and Oxygen is used to produce high quality Nitrogen Gas at various flows and purities (see performance data).

The Generator is controlled using the latest in HMI touch screen technology to display the process in real time, inlet/outlet pressures and oxygen level (optional).

RACK-ZA

More Information
FDGSi RACK-ZA GC-FID, GC-FPD, GC-NPD, THA, CO2 analyzer, Gas sensing

FDGSi RACK-ZA GC-FID, GC-FPD, GC-NPD, THA, CO2 analyzer, Gas sensing

The RACK-Zero Air generators produce dry and hydrocarbon-free air, using air from oil-free compressors, thus avoiding the need to use traditional bottles that are often complex to change.

Designed with safety and convenience in mind, this system will eliminating the need for inconvenient high pressure gas cylinders. This complete turnkey system is engineered with the highest quality components, is easy to install and requires only minimal annual maintenance.The ergonomic, compact and silent design makes the RACK-Zero Air series the ideal solution for the following analytical applications.

STREAM

More Information
FDGSi STREAM LCMS, Sample evaporation, TURBOVAP

FDGSi STREAM LCMS, Sample evaporation, TURBOVAP

The Membrane nitrogen generator has been developed to meet specific requirements in terms of flow, purity and pressure for LC-MS applications. It can also be used for the evaporation of solvents in samples being analysed.

The simple high efficiency membrane technology allows the separation of nitrogen from the other components of the compressed air inlet.